 10 Foot cord and 3.5 MM plug for power jacks |
More info ›› |
|
 This accessory cable has a 3.5mm mini plug on one end to match the "AUX" jack on the recorders, and spade-lug terminals on the other end for connecting your recorder to the audio output of couplers or radios which do not have their own connecting cables. It is six feet long and can be special ordered in other lengths and with different types of connectors on either end of the cable to meet specific requirements. Click here for photo. $5.25 |
More info ›› |
|
 The BT-327 is used when you have a telephone using two prong handset or headset jacks. Normally older phones or switchboards using this type of jack have two sets of the two prong jacks, one on the left and one on the right. Since only one jack is used for the operator, this adapter allows you to convert the unused jack to a standard modular handset/headset jack allowing devices such as Omnicron "TSA" series adapters to be used with your phone. $18.00 each. |
More info ›› |
|
 Starting at $122 The VP series of cassette tape players is designed to playback the recordings made on the VLR and CR-1 series of OMNICRON professional Voice Logging Recorders. They provide an inexpensive means of playing tapes without tying up the main recorder/player. Since these players do not have the ability to make recordings, accidental erasure is not possible. |
More info ›› |
|
|
The LIC-100 isolation coupler is used to connect a logging recorder to telephone circuits, two-way radio lines, etc. It provides a balanced line-input, transformer isolation, capacitive coupling, RF bypass, and balanced line-output. |
More info ›› |
|
 The LIC-1PC is used to provide a simple and inexpensive method of connecting supervisory monitoring equipment to telephone lines, two-way radio circuits, etc. It provides a balanced line-input, transformer isolation, capacitive coupling, RF bypass, and balanced line-output. The adjustable audio output can be set to a weak level for use with microphone (MIC) input circuits, or it can be turned up for use with auxiliary (AUX) level input circuits. |
More info ›› |
|
 The LIC-390 isolation coupler is used to connect a logging recorder to telephone circuits, two-way radio lines, etc. It provides a balanced line-input, transformer isolation, capacitive coupling, RF bypass, and balanced line-output. A voltage sensing mute circuit prevents voice activated recorders from false triggering when the coupler is connected to a voltage controlled telephone line. |
More info ›› |
|
 For private monitoring during record or playback, one or two headphones can be used with each "VLR" recorder. Up to four headphones can be used with each "VP" player. Speaker-like sound elements provide a wide range of sound reproduction. Large comfortable earmuffs are washable. Click here for photo. $49.00 |
More info ›› |
|
 CASSETTE TAPE
Omnicron MLC-120 and MLC-90 Magnetic Leader Cassette Tapes permit recording to start immediately, with no waiting, or loss at the beginning or end of the cassette. Click here for photo. MLC-120 $4.50, MLC-90 - $3.75 |
More info ›› |
|
 MTJ-3 "T" Adapter - Converts a single
RJ-11 phone jack to two RJ-11 jacks. |
More info ›› |
|
 This adapter/cable-assembly splits a 2-line RJ-14 circuit/jack into two RJ-11 jacks - Line-1 and Line-2. $12.00 |
More info ›› |
|
 Starting at $209 The Omnicron PZ-2LA (shown in above photo) and PZ-2L Microphones are Pressure Zone Microphones® designed for meeting and conference recording. They look like a switch, not a microphone, so as not to draw attention. |
More info ›› |
|
 RBC-6NM Set of six "C" size NIMH
(Nickel Metal Hydride)
Rechargeable Batteries used in VLR Recorders |
More info ›› |
|
 The RJ14-S is an eighteen foot cable assembly used to separate two line RJ-14 phone jacks (L1+L2) into individual RJ-11 jacks or plugs. It can also be used to combine two phone lines from two RJ-11 jacks or cables onto a single RJ-14 plug. |
More info ›› |
|
 The Omnicron RMC-88 is an external microphone for use with portable cassette tape recorders. It has a built-in ON/OFF switch to control the audio output to your recorder. Click here for photo. $13.50 |
More info ›› |
|
 The RSA-2A1 is used in certain applications to combine audio from two line level sources, such as remote controlled 2-way radio circuits, into a single audio output. Normally, this mixed audio output would be connected to the input of a logging recorder so that both sources can be recorded on a single recording channel. |
More info ›› |
|
 The RSA-M1 is used to provide a simple and inexpensive method of connecting an Omnicron recorder to Motorola two-way radios. It is usable on most Motorola radios that have an eight position modular microphone jack. |
More info ›› |
|
 The RSA-M2 is used to provide a simple and inexpensive method of connecting voice logging recorders to certain Motorola two-way radios. It only works with older Motorola radios that have an eight position modular microphone jack with receive audio present at all times. It combines receive and transmit audio at levels matched to the line input of voice logging recorders. It also provides transformer isolation and RF bypass. For newer Motorola radios that do not have constant receive audio on the |
More info ›› |
|
 The RSA-M3 is used to provide a simple and inexpensive method of connecting voice logging recorders to two-way radios that are not remote controlled (with remote controlled radios most digital logging recorders can be directly connected to the control pair). It combines receive and transmit audio at levels matched to the line input of voice logging recorders. It also provides transformer isolation and RF bypass. |
More info ›› |
|
 The RSA-M4 is used to provide a simple and inexpensive method of connecting voice logging recorders to two-way radios that are not remote controlled (with remote controlled radios most digital logging recorders can be directly connected to the control pair).
When the radio is transmitting, a relay is used to disconnect the audio output of the RSA-M4 from receive audio and connect it to the transmitter audio only when transmitting. The RSA-M4 is designed to match audio levels com |
More info ›› |
|
